SH7261 Datasheet, PDF (882/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 19 Controller Area Network (RCAN-ET) [R5S72611] [R5S72613]
19.5.3 Transmit Acknowledge Register 0 (TXACK0)
The TXACK0 is a 16-bit read/conditionally-write registers. This register is used to signal to the
CPU that a mailbox transmission has been successfully made. When a transmission has succeeded
the RCAN-ET sets the corresponding bit in the TXACK register. The CPU may clear a TXACK
bit by writing a '1' to the corresponding bit location. Writing a '0' has no effect.
• TXACK0
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
TXACK0[15:1]
0
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* —
Note: * Only when writing a '1' to clear.
Bit 15 to 1 — Notifies that the requested transmission of the corresponding Mailbox has been
finished successfully. The bit 15 to 1 corresponds to Mailbox-15 to 1 respectively.
Bit[15:1]:TXACK0 Description
0
[Clearing Condition] Writing '1' (Initial value)
1
Corresponding Mailbox has successfully transmitted message (Data or
Remote Frame)
[Setting Condition] Completion of message transmission for corresponding
mailbox
Bit 0 — This bit is always '0' as this is a receive-only mailbox. Writing a '1' to this bit position has
no effect and always read back as a '0'.
Rev. 2.00 Sep. 07, 2007 Page 850 of 1312
REJ09B0320-0200