SH7261 Datasheet, PDF (548/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
• Example of Procedure for Setting Output Waveform Control at Synchronous Counter Clearing
in Complementary PWM Mode
An example of the procedure for setting output waveform control at synchronous counter
clearing in complementary PWM mode is shown in figure 12.57.
Output waveform control at
synchronous counter clearing
Stop count operation
[1]
Set TWCR and
complementary PWM mode
[2]
Start count operation
[3]
Output waveform control at
synchronous counter clearing
[1] Clear bits CST3 and CST4 in the timer
start register (TSTR) to 0, and halt timer
counter (TCNT) operation. Perform
TWCR setting while TCNT_3 and
TCNT_4 are stopped.
[2] Read bit WRE in TWCR and then write 1
to it to suppress initial value output at
counter clearing.
[3] Set bits CST3 and CST4 in TSTR to 1 to
start count operation.
Figure 12.57 Example of Procedure for Setting Output Waveform Control at Synchronous
Counter Clearing in Complementary PWM Mode
• Examples of Output Waveform Control at Synchronous Counter Clearing in Complementary
PWM Mode
Figures 12.58 to 12.61 show examples of output waveform control in which the MTU2
operates in complementary PWM mode and synchronous counter clearing is generated while
the WRE bit in TWCR is set to 1. In the examples shown in figures 12.58 to 12.61,
synchronous counter clearing occurs at timing (3), (6), (8), and (11) shown in figure 12.56,
respectively.
Rev. 2.00 Sep. 07, 2007 Page 516 of 1312
REJ09B0320-0200