SH7261 Datasheet, PDF (1068/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 22 A/D Converter (ADC)
Sensor input
Sensor output impedance
Up to 5 kΩ
Low-pass filter
C to 0.1 µF
This LSI
A/D converter
equivalent circuit
3 kΩ
Cin =
15 pF
20 pF
Note: Values are reference values.
Figure 22.10 Example of Analog Input Circuit
22.7.6 Influences on Absolute Precision
Adding capacitance results in coupling with GND, and therefore noise in GND may adversely
affect absolute precision. Be sure to connect AVss, etc. to an electrically stable GND.
Care is also required to insure that filter circuits do not communicate with digital signals on the
mounting board (i.e., acting as antennas).
22.7.7 Usage Note when Shifting to Single Mode during A/D Conversion
During the A/D conversion in scan mode or multi mode, if the A/D conversion is stopped by
clearing the A/D start bit (ADST) in ADCSR to 0 and restarted after a transition to single mode,
make sure to set ASDT to 1 after the time required for one-channel A/D conversion has elapsed.
Rev. 2.00 Sep. 07, 2007 Page 1036 of 1312
REJ09B0320-0200