SH7261 Datasheet, PDF (207/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 7 User Break Controller (UBC)
Initial
Bit
Bit Name Value
15
SCMFC0 0
14
SCMFC1 0
13
SCMFD0 0
12
SCMFD1 0
11 to 7 
All 0
R/W Description
R/W C Bus Cycle Condition Match Flag 0
When the C bus cycle condition in the break conditions
set for channel 0 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The C bus cycle condition for channel 0 does not
match
1: The C bus cycle condition for channel 0 matches
R/W C Bus Cycle Condition Match Flag 1
When the C bus cycle condition in the break conditions
set for channel 1 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The C bus cycle condition for channel 1 does not
match
1: The C bus cycle condition for channel 1 matches
R/W I Bus Cycle Condition Match Flag 0
When the I bus cycle condition in the break conditions
set for channel 0 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The I bus cycle condition for channel 0 does not
match
1: The I bus cycle condition for channel 0 matches
R/W I Bus Cycle Condition Match Flag 1
When the I bus cycle condition in the break conditions
set for channel 1 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The I bus cycle condition for channel 1 does not
match
1: The I bus cycle condition for channel 1 matches
R Reserved
These bits are always read as 0. The write value
should always be 0.
Rev. 2.00 Sep. 07, 2007 Page 175 of 1312
REJ09B0320-0200