SH7261 Datasheet, PDF (466/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
Initial
Bit
Bit Name Value R/W Description
2
CST2
0
R/W Counter Start 2 to 0
1
CST1
0
R/W These bits select operation or stoppage for TCNT.
0
CST0
0
R/W If 0 is written to the CST bit during operation with the
TIOC pin designated for output, the counter stops but
the TIOC pin output compare output level is retained. If
TIOR is written to when the CST bit is cleared to 0, the
pin output level will be changed to the set initial output
value.
0: TCNT_2 to TCNT_0 count operation is stopped
1: TCNT_2 to TCNT_0 performs count operation
• TSTR_5
Bit: 7
6
5
4
3
2
1
0
— — — — — CSTU5 CSTV5 CSTW5
Initial value: 0
0
0
0
0
0
0
0
R/W: R R R R R R/W R/W R/W
Initial
Bit
Bit Name Value R/W Description
7 to 3 —
All 0
R
Reserved
These bits are always read as 0. The write value should
always be 0.
2
CSTU5
0
R/W Counter Start U5
Selects operation or stoppage for TCNTU_5.
0: TCNTU_5 count operation is stopped
1: TCNTU_5 performs count operation
1
CSTV5
0
R/W Counter Start V5
Selects operation or stoppage for TCNTV_5.
0: TCNTV_5 count operation is stopped
1: TCNTV_5 performs count operation
0
CSTW5
0
R/W Counter Start W5
Selects operation or stoppage for TCNTW_5.
0: TCNTW_5 count operation is stopped
1: TCNTW_5 performs count operation
Rev. 2.00 Sep. 07, 2007 Page 434 of 1312
REJ09B0320-0200