SH7261 Datasheet, PDF (645/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 13 8-Bit Timers (TMR)
13.4 Operation
13.4.1 Pulse Output
Figure 13.2 shows an example of the 8-bit timer being used to generate a pulse output with a
desired duty cycle. The control bits are set as follows:
1. In TCR, clear bit CCLR1 to 0 and set bit CCLR0 to 1 so that TCNT is cleared at a TCORA
compare match.
2. In TCSR, set bits OS3 to OS0 to B'0110, causing the output to change to 1 at a TCORA
compare match and to 0 at a TCORB compare match.
With these settings, the 8-bit timer provides pulses output at a cycle determined by TCORA with a
pulse width determined by TCORB. No software intervention is required. The output level of the
8-bit timer holds 0 until the first compare match occurs after a reset.
H'FF
TCORA
TCORB
H'00
TMO
TCNT
Counter clear
Figure 13.2 Example of Pulse Output
Rev. 2.00 Sep. 07, 2007 Page 613 of 1312
REJ09B0320-0200