SH7261 Datasheet, PDF (595/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
12.7.15 Reset Sync PWM Mode Buffer Operation and Compare Match Flag
When setting buffer operation for reset sync PWM mode, set the BFA and BFB bits in TMDR_4
to 0. The TIOC4C pin will be unable to produce its waveform output if the BFA bit in TMDR_4 is
set to 1.
In reset sync PWM mode, the channel 3 and channel 4 buffers operate in accordance with the BFA
and BFB bit settings of TMDR_3. For example, if the BFA bit in TMDR_3 is set to 1, TGRC_3
functions as the buffer register for TGRA_3. At the same time, TGRC_4 functions as the buffer
register for TGRA_4.
The TGFC bit and TGFD bit in TSR_3 and TSR_4 are not set when TGRC_3 and TGRD_3 are
operating as buffer registers.
Figure 12.121 shows an example of operations for TGR_3, TGR_4, TIOC3, and TIOC4, with
TMDR_3's BFA and BFB bits set to 1, and TMDR_4's BFA and BFB bits set to 0.
TGRA_3
TGRC_3
TCNT3
Point a
TGRB_3, TGRA_4,
TGRB_4
TGRD_3, TGRC_4, ^{Point b}
TGRD_4
H'0000
Buffer transfer with
compare match A3
TGRA_3,
TGRC_3
TGRB_3, TGRD_3,
TGRA_4, TGRC_4,
TGRB_4, TGRD_4
TIOC3A
TIOC3B
TIOC3D
TIOC4A
TIOC4C
TIOC4B
TIOC4D
TGFC
TGFD
Not set
Not set
Figure 12.121 Buffer Operation and Compare-Match Flags
in Reset Synchronous PWM Mode
Rev. 2.00 Sep. 07, 2007 Page 563 of 1312
REJ09B0320-0200