SH7261 Datasheet, PDF (839/1348 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 18 Serial Sound Interface (SSI)
18.5.2 Note on Using Oversample Clock
To use the externally input clock as the oversample clock, refer to the section 4.6.1, Note on
Inputting External Clock, in which the terms EXTAL and XTAL pins should be replaced by the
AUDIO_X1 and AUDIO_X2 pins respectively.
To use the crystal resonator, refer to the section 4.6.2, Note on Using Crystal Resonator, in which
the terms EXTAL and XTAL pins should be replaced by the AUDIO_X1 and AUDIO_X2 pins
respectively.
Also, see section 4.6.3, Note on Resonator.
18.5.3 Restriction on Stopping Clock Supply
Once the bits MSTP53 and MSTP52 in the standby control register 5 (STBCR5) are cleared to 0
and the SSI operation is started, do not set these bits to 1 (stops clock supply to the SSI).
Rev. 2.00 Sep. 07, 2007 Page 807 of 1312
REJ09B0320-0200