|
82NM10 Datasheet, PDF (642/671 Pages) Intel Corporation – Intel® NM10 Family Express Chipset | |||
|
◁ |
PCI Express* Configuration Registers
19.1.38 MDâMessage Signaled Interrupt Message Data Register
(PCI ExpressâD28:F0/F1/F2/F3)
Address Offset: 88hâ89h
Default Value: 0000h
Attribute:
Size:
R/W
16 bits
Bit
Description
15:0
Data (DATA) â R/W. This 16-bit field is programmed by system software if MSI is
enabled. Its content is driven onto the lower word (PCI AD[15:0]) during the data
phase of the MSI memory write transaction.
19.1.39 SVCAPâSubsystem Vendor Capability Register
(PCI ExpressâD28:F0/F1/F2/F3)
Address Offset: 90hâ91h
Default Value: A00Dh
Attribute:
Size:
RO
16 bits
Bit
Description
15:8
7:0
Next Capability (NEXT) â RO. This field indicates the location of the next pointer in
the list.
Capability Identifier (CID) â RO. Value of 0Dh indicates this is a PCI bridge
subsystem vendor capability.
19.1.40 SVIDâSubsystem Vendor Identification Register
(PCI ExpressâD28:F0/F1/F2/F3)
Address Offset: 94hâ97h
Default Value: 00000000h
Attribute:
Size:
R/WO
32 bits
Bit
Description
31:16 Subsystem Identifier (SID) â R/WO. This field indicates the subsystem as identified
by the vendor. This field is write once and is locked down until a bridge reset occurs
(not the PCI bus reset).
15:0
Subsystem Vendor Identifier (SVID) â R/WO. This field indicates the manufacturer
of the subsystem. This field is write once and is locked down until a bridge reset occurs
(not the PCI bus reset).
19.1.41 PMCAPâPower Management Capability Register
(PCI ExpressâD28:F0/F1/F2/F3)
Address Offset: A0hâA1h
Default Value: 0001h
Attribute:
Size:
RO
16 bits
Bit
Description
15:8
7:0
Next Capability (NEXT) â RO. This field indicates that this is the last item in the list.
Capability Identifier (CID) â RO. Value of 01h indicates this is a PCI power
management capability.
642
Datasheet
|
▷ |