SH7730 Datasheet, PDF (91/1188 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7780 Series

Section 2 Programming Model
2.3 Memory-Mapped Registers
Some control registers are mapped to the following memory areas. Each of the mapped registers
has two addresses.
H'1C00 0000 to H'1FFF FFFF
H'FC00 0000 to H'FFFF FFFF
These two areas are used as follows.
• H'1C00 0000 to H'1FFF FFFF
This area must be accessed using the address translation function of the MMU.
Setting the page number of this area to the corresponding field of the TLB enables access to a
memory-mapped register.
The operation of an access to this area without using the address translation function of the
MMU is not guaranteed.
• H'FC00 0000 to H'FFFF FFFF
Access to area H'FC00 0000 to H'FFFF FFFF in user mode will cause an address error.
Memory-mapped registers can be referenced in user mode by means of access that involves
address translation.
Note:
Do not access addresses to which registers are not mapped in either area. The operation of
an access to an address with no register mapped is undefined. Also, memory-mapped
registers must be accessed using a fixed data size. The operation of an access using an
invalid data size is undefined.
Rev. 1.00 Sep. 19, 2007 Page 43 of 1136
REJ09B0359-0100