SH7730 Datasheet, PDF (1025/1188 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7780 Series

Section 30 User Break Controller (UBC)
30.2 Register Descriptions
The UBC has the following registers.
Table 30.1 Register Configuration
Name
Area 7
Abbreviation R/W P4 Address* Address*
Access
Size
Match condition setting
register 0
CBR0
R/W H'FF200000 H'1F200000
32
Match operation setting
register 0
CRR0
R/W H'FF200004 H'1F200004
32
Match address setting
register 0
CAR0
R/W H'FF200008 H'1F200008
32
Match address mask setting CAMR0
register 0
R/W H'FF20000C H'1F20000C 32
Match condition setting
register 1
CBR1
R/W H'FF200020 H'1F200020
32
Match operation setting
register 1
CRR1
R/W H'FF200024 H'1F200024
32
Match address setting
register 1
CAR1
R/W H'FF200028 H'1F200028
32
Match address mask setting CAMR1
register 1
R/W H'FF20002C H'1F20002C 32
Match data setting register 1 CDR1
R/W H'FF200030 H'1F200030
32
Match data mask setting
register 1
CDMR1
R/W H'FF200034 H'1F200034
32
Execution count break
register 1
CETR1
R/W H'FF200038 H'1F200038
32
Channel match flag register CCMFR
R/W H'FF200600 H'1F200600
32
Break control register
CBCR
R/W H'FF200620 H'1F200620
32
Note: * P4 addresses are used when area P4 in the virtual address space is used, and area 7
addresses are used when accessing the register through area 7 in the physical address
space using the TLB.
Rev. 1.00 Sep. 19, 2007 Page 977 of 1136
REJ09B0359-0100