SH7730 Datasheet, PDF (871/1188 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7780 Series

Section 25 SIM Card Module (SIM)
Initial
Bit
Bit Name Value R/W Description
2
TEIE
0
R/W Transmit End Interrupt Enable
When transmission ends and the TEND flag is set to 1,
transmit end interrupt (TEI) requests are
enabled/disabled.
0: Disables transmit end interrupt (TEI) requests*
1: Enables transmit end interrupt (TEI) requests*
Note: * A TEI can be canceled either by writing
transmit data to SCTDR and clearing the
TEND bit, or by clearing the TEIE bit to 0 after
the TDRE flag in SCSSR is read as 1.
1
CKE1
0
R/W Clock Enable
0
CKE0
0
R/W Select the clock source for the smart card interface, and
enable/disable clock output from the SIM_CLK pin.
00: Fix the output pin low
01: Clock output as the output pin
10: Fix the output pin high
11: Clock output as the output pin
Rev. 1.00 Sep. 19, 2007 Page 823 of 1136
REJ09B0359-0100