PXD10RM Datasheet, PDF (856/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

Field
0:19
RTO[0:3]
20:23
24
HTO[0:6]
25:31
Table 23-14. LINTOCR field descriptions
Description
Reserved
Response timeout value
This register contains the response timeout duration (in bit time) for 1 byte.
The reset value is 0xE = 14, corresponding to T_{Response_Maximum} = 1.4 × T_{Response_Nominal}
Reserved
Header timeout value
This register contains the header timeout duration (in bit time). This value does not include the
Break and the Break Delimiter. The reset value is the 0x2C = 44, corresponding to
T_{Header_Maximum.} Setting MME bit in LINSR changes HTO[0:6] value to 0x1C = 28.
HTO[0:6] can be written only in Slave mode.
23.7.2.10 LIN fractional baud rate register (LINFBRR)
Address: Base + 0x0024
Access: User read/write
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
R0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16
R0
W
Reset 0
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
00000000000
DIV_F[0:3]
000000000000000
Figure 23-16. LIN fractional baud rate register (LINFBRR)
Table 23-15. LINFBRR field descriptions
Field
0:27
DIV_F[0:3]
28:31
Description
Reserved
Fraction bits of LFDIV
The 4 fraction bits define the value of the fraction of the LINFlex divider (LFDIV).
Fraction (LFDIV) = Decimal value of DIV_F [0:3] / 16.
This register can be written in Initialization mode only.
23-24
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor