|
PXD10RM Datasheet, PDF (336/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller | |||
|
◁ |
⢠Digital video input with and without sync extraction per ITU-R BT.656 supporting multiple video
input formats including RGB666, RGB565, monochrome and YCbCr422
⢠Dedicated memory blocks to store a cursor and Color Look Up Tables (CLUTs)
Each graphic layer has the following attributes
⢠Can be placed with one pixel resolution in either axis
⢠Supports multiple color-encoding formats including 1, 2, 4 and 8 bits per pixel indexed colors,
RGB565 and RGB888 direct colors, and ARGB1555, ARGB4444 and ARGB8888 direct colors
with an alpha channel
⢠Alpha blending with 8-bit resolution
⢠Chroma-key blending for anti-mask encoding
⢠Multiple alpha and chroma-key blending modes
⢠Transparency modes for anti-aliased text and graphics
⢠Luminance mode for highlighting content
⢠Tile mode for efficient creation of textured background content
12.1.3 Modes of Operation
The DCU has four modes of operation:
⢠DCU_OFF: When in this mode, the DCU is turned off. All the logic in the design is put in reset
state to reduce power.
⢠NORMAL_MODE: The DCU displays and blends the graphics specified by the layer descriptors.
⢠PDI_MODE: A mode which fetches video from an external video source and combines that with
the graphics configured on the layers.
⢠COLBAR_MODE: Color bar generation for testing purposes.
12.2 External Signal Description
12.2.1 Overview
The DCU has up to 22 input signals and up to 30 output signals. See Figure 12-2. The choice of signals
used depends on the configuration of the DCU. All active signals must be enabled by configuring the
appropriate PCR registers in the SIUL module.
12-4
PXD10 Microcontroller Reference Manual, Rev. 1
PreliminaryâSubject to Change Without Notice
Freescale Semiconductor
|
▷ |