PXD10RM Datasheet, PDF (1144/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

35.3.2.12 Short-circuit Detector Interrupt Enable Register 2 (MCSDIEN2)
Offset Module Base + 0x004A
0
1
2
3
4
5
6
7
R
SDIE
W
Reset
0
0
0
0
0
0
0
0
Figure 35-13. Short-circuit Detector Interrupt Enable Register 2 (MCSDIEN2)
Table 35-15. MCSDIEN2 Field Descriptions
Field
SDIE
Description
Short-Circuit Detector Interrupt Enable — The interrupt of each short-circuit detector can
individually be enabled or disabled according to the mapping described in Table 35-23. The
short-circuit detector interrupt of a given pin is enabled if the related interrupt enable bit is set to 1.
35.3.2.13 Short-circuit Detector Interrupt Register 0 (MCSDI0)
Offset Module Base + 0x004C
0
1
2
3
4
5
6
7
R
SDIF
W rwm
rwm
rwm
rwm
rwm
rwm
rwm
rwm
Reset
0
0
0
0
0
0
0
0
Figure 35-14. Short-circuit Detector Interrupt Register 0 (MCSDI0)
Table 35-16. MCSDI0 Field Descriptions
Field
SDIF
Description
Short-circuit Detector Interrupt Flag — In case of a detected short-circuit, the corresponding bit
according to the mapping in Table 35-23 is set in the short-circuit detector interrupt register.
If this specific interrupt is also enabled in the interrupt enable register MCSDIEN0, than this event will
rise an external interrupt.
35-16
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor