PXD10RM Datasheet, PDF (1254/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

.
Address: 0x0028
Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R_{0 0 0 0 0 0 0 0 0 0 0}
W
1
IREE[20:0]
Reset _{0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0}
Figure 41-8. Wakeup/Interrupt Rising-Edge Event Enable Register (WIREER)
1 _{Not all bits are available in the 144-pin package.}
Field
IREE[x]
Table 41-8. WIREER Field Descriptions
Description
External Interrupt Rising-edge Events Enable x.
1 Rising-edge event is enabled
0 Rising-edge event is disabled
41.4.2.7 Wakeup/Interrupt Falling-Edge Event Enable Register (WIFEER)
This register is used to enable falling-edge triggered events on the corresponding wakeup/interrupt pads.
Address: 0x002C
Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R_{0 0 0 0 0 0 0 0 0 0 0}
W
1
IFEE[20:0]
Reset _{0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0}
Figure 41-9. Wakeup/Interrupt Falling-Edge Event Enable Register (WIFEER)
1 _{Not all bits are available in the 144-pin package.}
Field
IFEEx
Table 41-9. WIFEER Field Descriptions
Description
External Interrupt Falling-edge Events Enable x.
1 Falling-edge event is enabled
0 Falling-edge event is disabled
41.4.2.8 Wakeup/Interrupt Filter Enable Register (WIFER)
This register is used to enable an analog filter on the corresponding interrupt pads to filter out glitches on
the inputs.
NOTE
There is no analog filter for the RC_API.
41-8
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor