PXD10RM Datasheet, PDF (1107/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

Table 32-9. Functional Event Short Sequence Register (RGM_FESS) Field Descriptions (continued)
Field
Description
SS_FMPLL0 Short Sequence for FMPLL0 fail
0 The reset sequence triggered by a FMPLL0 fail event will start from PHASE1
1 The reset sequence triggered by a FMPLL0 fail event will start from PHASE3, skipping PHASE1 and PHASE2
SS_CHKST
OP
Short Sequence for checkstop reset
0 The reset sequence triggered by a checkstop reset event will start from PHASE1
1 The reset sequence triggered by a checkstop reset event will start from PHASE3, skipping PHASE1 and
PHASE2
SS_SOFT
Short Sequence for software reset
0 The reset sequence triggered by a software reset event will start from PHASE1
1 The reset sequence triggered by a software reset event will start from PHASE3, skipping PHASE1 and
PHASE2
SS_CORE Short Sequence for core reset
0 The reset sequence triggered by a core reset event will start from PHASE1
1 The reset sequence triggered by a core reset event will start from PHASE3, skipping PHASE1 and PHASE2
SS_JTAG
Short Sequence for JTAG initiated reset
0 The reset sequence triggered by a JTAG initiated reset event will start from PHASE1
1 The reset sequence triggered by a JTAG initiated reset event will start from PHASE3, skipping PHASE1 and
PHASE2
32.3.1.8 STANDBY Reset Sequence Register (RGM_STDBY)
Address 0xC3FE_401A
Access: Supervisor read/write
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
W
reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Figure 32-9. STANDBY Reset Sequence Register (RGM_STDBY)
This register defines reset sequence to be applied on STANDBY mode exit. It can be accessed in read/write
in either supervisor mode or test mode. It can be accessed in read only in user mode.
Table 32-10. STANDBY Reset Sequence Register (RGM_STDBY) Field Descriptions
Field
Description
BOOT_
FROM_
BKP_RAM
Boot from Backup RAM indicator — This bit indicates whether the system will boot from backup RAM or flash
out of STANDBY exit.
0 Boot from flash on STANDBY exit
1 Boot from backup RAM on STANDBY exit
Freescale Semiconductor
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
32-15