PXD10RM Datasheet, PDF (822/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

Current
at plane
Standard Current with
Boost variation
2x Standard Current with
Boost variation
Current
consumed
by system
16 x boost
8 x boost _{boost disabled}
Plane Switching
time
Output Current variation
with and
without boost
4 x standard
2 x standard
Plane Switching
standard current
time
Figure 22-24. PWR, BST, BSTEN Example Diagram
22.5.10 Interrupts
This section describes all interrupts originated by LCD64F6B.
22.5.10.1 EOF Interrupt
LCDEN must be set to enable the interrupt at end of frame feature. Every time a frame generation was
completed a counter is decremented by 1. If the counter reaches zero End of Frame interrupt Flag (EOF)
bit is set and the counter is reset to NOF. The counter is reset to request interrupt at the end of every frame,
as if NOF would be 0x00, if LCDEN is asserted while the LCD is off.
22-36
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor