PXD10RM Datasheet, PDF (41/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

• Single issue, 32-bit Power Architecture technology compliant CPU core complex (e200z0h)
— Compatible with Power Architecture instruction set
— Includes variable length encoding (VLE) instruction set for smaller code size footprint; with
the encoding of mixed 16-bit and 32-bit instructions, it is possible to achieve significant code
size footprint reduction over conventional Book E compliant code
• On-chip ECC flash memory with flash controller
— As much as 1 MB primary flash—two 512 KB modules with prefetch buffer and 128-bit data
access port
— 64 KB data flash—separate 416 KB flash block for EEPROM emulation with prefetch buffer
and 128-bit data access port
• As much as 48 KB on-chip ECC SRAM with SRAM controller
• As much as 160 KB on-chip non-ECC graphics SRAM with SRAM controller
• Memory Protection Unit (MPU) with as many as 12 region descriptors and 32-byte region
granularity to provide basic memory access permission
• Interrupt Controller (INTC) with as many as 127 peripheral interrupt sources and eight software
interrupts
• Two Frequency-Modulated Phase-Locked Loops (FMPLLs)
— Primary FMPLL provides a 64 MHz system clock
— Auxiliary FMPLL is available for use as an alternate, modulated or non-modulated clock
source to eMIOS modules and as alternate clock to the DCU for pixel clock generation
• Crossbar switch architecture enables concurrent access of peripherals, flash memory or RAM from
multiple bus masters (AMBA 2.0 v6 AHB)
• 16-channel Enhanced Direct Memory Access controller (eDMA) with multiple transfer request
sources using a DMA channel multiplexer
• Boot Assist Module (BAM) supports internal flash programming via a serial link (FlexCAN or
LINFlex)
• Display Control Unit to drive TFT LCD displays
— Includes processing of as many as four planes that can be blended together
— Offers a direct unbuffered hardware bit-blitter of as many as 16 software-configurable dynamic
layers in order to drastically minimize graphic memory requirements and provide fast
animations
— Programmable display resolutions are available up to WVGA
• Parallel Data Interface (PDI) for digital video input
• LCD segment driver module with two software programmable configurations:
— As many as 40 frontplane drivers and four backplane drivers
— As many as 38 frontplane drivers and six backplane drivers
• Stepper Motor Controller (SMC) module with high-current drivers for as many as six stepper
motors driven in full dual H-Bridge configuration including full diagnostics for short circuit
detection
PXD10 Microcontroller Reference Manual, Rev. 1
Freescale Semiconductor
1-5
Preliminary—Subject to Change Without Notice