PXD10RM Datasheet, PDF (560/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

Table 17-6. Flash 528 KB single bank registers (continued)
Register name
Low/mid Address Space Block Locking Register (LML)
High Address Space Block Locking Register (HBL)
Secondary Low/mid Address Space Block Lock Register (SLL)
Low/mid Address Space Block Select Register (LMS)
High Address Space Block Select Register (HBS)
Address Register (ADR)
Bus Interface Unit Register 0 (BIU0)
Bus Interface Unit Register 1 (BIU1)
Bus Interface Unit Register 2 (BIU2)
Reserved
Reserved
Reserved
Reserved
Reserved
User Test Register 0 (UT0)
User Test Register 1 (UT1)
User Test Register 2 (UT2)
User Multiple Input Signature Register 0 (UMISR0)
User Multiple Input Signature Register 1 (UMISR1)
User Multiple Input Signature Register 2 (UMISR2)
User Multiple Input Signature Register 3 (UMISR3)
User Multiple Input Signature Register 4 (UMISR4)
Address
Offset
0x0004
0x0008
0x000C
0x0010
0x0014
0x0018
0x001C
0x0020
0x0024
0x0028
0x002C
0x0030
0x0034
0x0038
0x003C
0x0040
0x0044
0x0048
0x004C
0x0050
0x0054
0x0058
Location
on page 16
on page 18
on page 19
on page 22
on page 23
on page 24
on page 25
on page 26
on page 26
on page 28
on page 30
on page 30
on page 31
on page 32
on page 32
on page 33
on page 34
In the following some non-volatile registers are described. Please notice that such entities are not
Flip-Flops, but locations of Test Flash or Shadow sectors with a special meaning.
During the Flash Initialization phase, the FPEC reads these non-volatile registers and update their related
Volatile Registers. When the FPEC detects ECC double errors in these special locations, it behaves in the
following way:
• In case of a failing system locations (configurations, device options, redundancy, EmbAlgo
firmware), the initialization phase is interrupted and a Fatal Error is flagged.
• In case of failing user locations (protections, censorship, BIU, ...), the Volatile Registers are filled
with all ‘1’s and the Flash initialization ends setting low the PEG bit of MCR.
In this section, the following abbreviations are used
17-10
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor