PXD10RM Datasheet, PDF (576/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

Table 17-20. BIU0 field descriptions
Field
Description
0:31 BI031-00: Bus Interface unit 0 31-00 (Read/Write)
The writability of the bits in this register can be locked.
NOTE
On this device, BIU0 and PFCR0 are the same register. Your software may
refer to either register. For clarity, however, it is recommended that you use
PFCR0.
17.2.6.12 Bus Interface Unit 1 register (BIU1)
Address Offset: 0x00020
Reset value: 0xXXXXXXXX
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
BI131 BI130 BI129 BI128 BI127 BI126 BI125 BI124 BI123 BI122 BI121 BI120 BI119 BI118 BI117 BI116
rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
BI115 BI114 BI113 BI112 BI111 BI110 BI109 BI108 BI107 BI106 BI105 BI104 BI103 BI102 BI101 BI100
rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X rw/X
Figure 17-11. Bus Interface Unit 1 register (BIU1)
The Bus Interface Unit 1 Register provides a mean for BIU specific information, or BIU configuration
information to be stored. Please see Section 17.4.3.2.2, Platform Flash Configuration Register 1
(PFCR1),” for more information about register description.
This register is present only in Code Flash 0.
Table 17-21. BIU1 field descriptions
Field
Description
0:31 BI131-00: Bus Interface unit 1 31-00 (Read/Write)
The writability of the bits in this register can be locked.
The use of this bus is SoC specific.
NOTE
On this device, BIU1 and PFCR1 are the same register. Your software may
refer to either register. For clarity, however, it is recommended that you use
PFCR1.
17.2.6.13 Bus Interface Unit 2 register (BIU2)
Address Offset: 0x00024
Reset value: 0xXXXXXXXX
17-26
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor