PXD10RM Datasheet, PDF (294/1332 Pages) Freescale Semiconductor, Inc – PXD10 Microcontroller

Table 11-5. DSPIx_CTARn Field Descriptions (continued)
Field
Descriptions
6
CPHA
Clock Phase. The CPHA bit selects which edge of SCK causes data to change and which edge
causes data to be captured. This bit is used in both Master and Slave Mode. For successful
communication between serial devices, the devices must have identical clock phase settings.
Continuous SCK is only supported for CPHA=1.
0 Data is captured on the leading edge of SCK and changed on the following edge
1 Data is changed on the leading edge of SCK and captured on the following edge
7
LSBFE
LSB First. The LSBFE bit selects if the LSB or MSB of the frame is transferred first. This bit is only
used in Master Mode. When operating in TSB configuration, this bit should be always 1.
0 Data is transferred MSB first
1 Data is transferred LSB first
8–9
PCS to SCK Delay Prescaler. The PCSSCK field selects the prescaler value for the delay between
PCSSCK[0:1 assertion of PCS and the first edge of the SCK. This field is only used in Master Mode. The table
]
below lists the prescaler values. See the CSSCK[0:3] field description for details on how to compute
the PCS to SCK Delay.
PCSSCK
00
01
10
11
PCS to SCK Delay Prescaler Value
1
3
5
7
10–11
PASC[0:1]
After SCK Delay Prescaler. The PASC field selects the prescaler value for the delay between the last
edge of SCK and the negation of PCS. This field is only used in Master Mode. The table below lists
the prescaler values. See the ASC[0:3] field description for details on how to compute the After SCK
Delay.
PASC
00
01
10
11
After SCK Delay Prescaler Value
1
3
5
7
11-12
PXD10 Microcontroller Reference Manual, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor