|
SH7059 Datasheet, PDF (703/1042 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer | |||
|
◁ |
Bit 14: PK15MD
0
1
Description
General input/output (PK15)
ATU-II one-shot pulse output (TO8P)
22. Pin Function Controller (PFC)
(Initial value)
⢠Bit 13âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 12âPK14 Mode Bit (PK14MD): Selects the function of pin PK14/TO8O.
Bit 12: PK14MD
0
1
Description
General input/output (PK14)
ATU-II one-shot pulse output (TO8O)
(Initial value)
⢠Bit 11âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 10âPK13 Mode Bit (PK13MD): Selects the function of pin PK13/TO8N.
Bit 10: PK13MD
0
1
Description
General input/output (PK13)
ATU-II one-shot pulse output (TO8N)
(Initial value)
⢠Bit 9âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 8âPK12 Mode Bit (PK12MD): Selects the function of pin PK12/TO8M.
Bit 8: PK12MD
0
1
Description
General input/output (PK12)
ATU-II one-shot pulse output (TO8M)
(Initial value)
⢠Bit 7âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 6âPK11 Mode Bit (PK11MD): Selects the function of pin PK11/TO8L.
Bit 6: PK11MD
0
1
Description
General input/output (PK11)
ATU-II one-shot pulse output (TO8L)
(Initial value)
⢠Bit 5âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 4âPK10 Mode Bit (PK10MD): Selects the function of pin PK10/TO8K.
Bit 4: PK10MD
0
1
Description
General input/output (PK10)
ATU-II one-shot pulse output (TO8K)
(Initial value)
⢠Bit 3âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 2âPK9 Mode Bit (PK9MD): Selects the function of pin PK9/TO8J.
Bit 2: PK9MD
0
1
Description
General input/output (PK9)
ATU-II one-shot pulse output (TO8J)
(Initial value)
⢠Bit 1âReserved: This bit is always read as 0. The write value should always be 0.
Rev.3.00 Mar. 12, 2008 Page 613 of 948
REJ09B0177-0300
|
▷ |