SH7059 Datasheet, PDF (361/1042 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

11. Advanced Timer Unit-II (ATU-II)
A corrected clock (AGCKM) is output following correction each time this counter is incremented.
Bit: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
TCNT10F is can only be accessed by a word read or write.
TCNT10F is initialized to H'0001 by a power-on reset, and in hardware standby mode and software standby mode.
Free-Running Counter 10G (TCNT10G): Free-running counter 10G (TCNT10G) is a 16-bit readable/writable register
that counts up on the multiplied clock (AGCK1). TCNT10G is initialized to H'0000 by input from external input (TI10)
(AGCK).
Bit: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
TCNT10G can only be accessed by a word read or write.
TCNT10G is initialized to H'0000 by a power-on reset, and in hardware standby mode and software standby mode.
Registers
There are six registers in channel 10: a 32-bit ICR, 32-bit OCR, 16-bit GR, 16-bit RLD, 16-bit TCCLR, and 8-bit OCR.
Channel
10
Abbreviation
ICR10AH, AL
OCR10AH, AL
OCR10B
RLD10C
GR10G
TCCLR10
Function
32-bit input capture register (initial value H'00000000)
32-bit output compare register (initial value H'FFFFFFFF)
8-bit output compare register (initial value H'FF)
16-bit reload register (initial value H'0000)
16-bit general register (initial value H'FFFF)
16-bit correction counter clear register (initial value H'0000)
Rev.3.00 Mar. 12, 2008 Page 271 of 948
REJ09B0177-0300