SH7059 Datasheet, PDF (337/1042 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

11. Advanced Timer Unit-II (ATU-II)
• Bit 6—Duty Selection Register C (DTSELC): Selects whether channel 6C TO6C output PWM is set to on-duty or to
off-duty.
Bit 6: DTSELC
0
1
Description
TO6C PWM output is on-duty
TO6C PWM output is off-duty
(Initial value)
• Bit 5—Duty Selection Register B (DTSELB): Selects whether channel 6B TO6B output PWM is set to on-duty or to
off-duty.
Bit 5: DTSELB
0
1
Description
TO6B PWM output is on-duty
TO6B PWM output is off-duty
(Initial value)
• Bit 4—Duty Selection Register A (DTSELA): Selects whether channel 6A TO6A output PWM is set to on-duty or to
off-duty.
Bit 4: DTSELA
0
1
Description
TO6A PWM output is on-duty
TO6A PWM output is off-duty
(Initial value)
• Bit 3—Counter Selection Register D (CNTSELD): Selects whether channel 6D PWM is set to non-complementary
PWM mode or to complementary PWM mode.
Bit 3: CNTSELD
0
1
Description
TCNT6D is set to non-complementary PWM mode
TCNT6D is set to complementary PWM mode
(Initial value)
• Bit 2—Counter Selection Register C (CNTSELC): Selects whether channel 6C PWM is set to non-complementary
PWM mode or to complementary PWM mode.
Bit 2: CNTSELC
0
1
Description
TCNT6C is set to non-complementary PWM mode
TCNT6C is set to complementary PWM mode
(Initial value)
• Bit 1—Counter Selection Register B (CNTSELB): Selects whether channel 6B PWM is set to non-complementary
PWM mode or to complementary PWM mode.
Bit 1: CNTSELB
0
1
Description
TCNT6B is set to non-complementary PWM mode
TCNT6B is set to complementary PWM mode
(Initial value)
Rev.3.00 Mar. 12, 2008 Page 247 of 948
REJ09B0177-0300