|
SH7059 Datasheet, PDF (699/1042 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer | |||
|
◁ |
Bit 14: PJ15MD
0
1
Description
General input/output (PJ15)
ATU-II event counter input (TI9F)
22. Pin Function Controller (PFC)
(Initial value)
⢠Bit 13âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 12âPJ14 Mode Bit (PJ14MD): Selects the function of pin PJ14/TI9E.
Bit 12: PJ14MD
0
1
Description
General input/output (PJ14)
ATU-II event counter input (TI9E)
(Initial value)
⢠Bit 11âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 10âPJ13 Mode Bit (PJ13MD): Selects the function of pin PJ13/TI9D.
Bit 10: PJ13MD
0
1
Description
General input/output (PJ13)
ATU-II event counter input (TI9D)
(Initial value)
⢠Bit 9âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 8âPJ12 Mode Bit (PJ12MD): Selects the function of pin PJ12/TI9C.
Bit 8: PJ12MD
0
1
Description
General input/output (PJ12)
ATU-II event counter input (TI9C)
(Initial value)
⢠Bit 7âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 6âPJ11 Mode Bit (PJ11MD): Selects the function of pin PJ11/TI9B.
Bit 6: PJ11MD
0
1
Description
General input/output (PJ11)
ATU-II event counter input (TI9B)
(Initial value)
⢠Bit 5âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 4âPJ10 Mode Bit (PJ10MD): Selects the function of pin PJ10/TI9A.
Bit 4: PJ10MD
0
1
Description
General input/output (PJ10)
ATU-II event counter input (TI9A)
(Initial value)
⢠Bit 3âReserved: This bit is always read as 0. The write value should always be 0.
⢠Bit 2âPJ9 Mode Bit (PJ9MD): Selects the function of pin PJ9/TIO5D.
Bit 2: PJ9MD
0
1
Description
General input/output (PJ9)
ATU-II input capture input/output compare output (TIO5D)
(Initial value)
⢠Bit 1âReserved: This bit is always read as 0. The write value should always be 0.
Rev.3.00 Mar. 12, 2008 Page 609 of 948
REJ09B0177-0300
|
▷ |