SH7059 Datasheet, PDF (333/1042 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

11. Advanced Timer Unit-II (ATU-II)
Interval Interrupt Request Registers 2A and 2B (ITVRR2A, ITVRR2B)
Bit:
Initial value:
R/W:
Note: x = A or B
7
ITVA13x
0
R/W
6
ITVA12x
0
R/W
5
ITVA11x
0
R/W
4
ITVA10x
0
R/W
3
ITVE13x
0
R/W
2
ITVE12x
0
R/W
1
ITVE11x
0
R/W
0
ITVE10x
0
R/W
• Bit 7—A/D0 / A/D1 Converter Interval Activation Bit 13A/13B (ITVA13A/ITVA13B): A/D0 or A/D1 (ITVRR2A:
A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to bit 13 in TCNT0. The rise of bit 13 in
TCNT0 is ANDed with ITVA13x, and the result is output to the A/D0 or A/D1 converter as an activation signal.
Bit 7: ITVA13x
0
1
Note: x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 13 is disabled
A/D0 or A/D1 converter activation by rise of TCNT0 bit 13 is enabled
(Initial value)
• Bit 6—A/D0 / A/D1 Converter Interval Activation Bit 12A/12B (ITVA12A/ITVA12B): A/D0 or A/D1 (ITVRR2A:
A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to bit 12 in TCNT0. The rise of bit 12 in
TCNT0 is ANDed with ITVA12x, and the result is output to the A/D0 or A/D1 converter as an activation signal.
Bit 6: ITVA12x
0
1
Note: x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 12 is disabled
A/D0 or A/D1 converter activation by rise of TCNT0 bit 12 is enabled
(Initial value)
• Bit 5—A/D0 / A/D1 Converter Interval Activation Bit 11A/11B (ITVA11A/ITVA11B): A/D0 or A/D1 (ITVRR2A:
A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to bit 11 in TCNT0. The rise of bit 11 in
TCNT0 is ANDed with ITVA11x, and the result is output to the A/D0 or A/D1 converter as an activation signal.
Bit 5: ITVA11x
0
1
Note: x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 11 is disabled
A/D0 or A/D1 converter activation by rise of TCNT0 bit 11 is enabled
(Initial value)
• Bit 4—A/D0 / A/D1 Converter Interval Activation Bit 10A/10B (ITVA10A/ITVA10B): A/D0 or A/D1 (ITVRR2A:
A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to bit 10 in TCNT0. The rise of bit 10 in
TCNT0 is ANDed with ITVA10x, and the result is output to the A/D0 or A/D1 converter as an activation signal.
Bit 4: ITVA10x
0
1
Note: x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 10 is disabled
A/D0 or A/D1 converter activation by rise of TCNT0 bit 10 is enabled
(Initial value)
Rev.3.00 Mar. 12, 2008 Page 243 of 948
REJ09B0177-0300