SH7720 Datasheet, PDF (1488/1524 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Item
Page Revision (See Manual for Details)
29.5 Usage Notes
985 Changed
(2) Pin Function Control and Card
Type Switching
….Also, the card status change register (PCC0CSCR)
must be cleared after the setting has been made.
However, this restriction does not apply to the card
detection pins (CD1 and CD2).
Section 30 SIM Card Module
(SIM)
30.2 Input/Output Pins
Table 30.1 Pin Configuration
989 Changed
Name
SIM data
SIM clock
Abbreviation
SIM_D*
SIM_CLK
I/O
I/O
Output
SIM reset
SIM_RST
Output
31.3.3 Response Type Register
(RSPTYR)
1033 Changed
RSPTYR specifies command format in conjunction with
CMDTYR. Bits RTY2 to RTY0 are used to specify the
number of response bytes, and bits RTY5 and RTY4
are used to make additional settings.
1033 Bit 6 changed to a reserved bit.
1033
Note:Checking of CRC by RTY4 and RTY6 is not
checking the command response CRC error bit
but checking the command response CRC. This
checking is not performed for the CRC of the R2
command response in MMC mode.
Rev. 3.00 Jan. 18, 2008 Page 1426 of 1458
REJ09B0033-0300