SH7720 Datasheet, PDF (1240/1524 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 34 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value
R/W Description
2
PSELD2 0
1
PSELD1 0
R/W SIM_CLK/SCIF1_SCK/SD_DAT3 Select as PTV0
R/W ^{Other Functions}
00: Select SCIF1_SCK
01: Reserved
10: Select SIM_CLK
11: Select according to PSELB0 setting
Reserved when PSELB0 = 0
Select SD_DAT3 when PSELB0 = 1
0
PSELD0 0
R/W Pin SD_DAT3 Control when PSELD[2:1] = B'11
0: Pins are not controlled
1: Pins are controlled
SD_DAT3: Pulled up
34.1.23 USB Transceiver Control Register (UTRCTL)
UTRCTL controls 1.8 V/3.3 V I/O buffer drivability.
Bit
15 to 9
8
Bit Name

DRV
Initial
Value
All 0
0
7 to 2
1
0

All 0
USB_
0
TRANS
USB_SEL 1
R/W Description
R
Reserved
R/W I/O Buffer Drive Control
0: 1.8 V/3.3 V I/O buffer high drivability
1: 1.8 V/3.3 V I/O buffer low drivability
Power supply pin, VccQ1, can be applied 1.65 to 1.95
V or 2.7 to 3.6 V. When 1.65 to 1.95 V is applied to
VccQ1, setting the drivability high (DRV = 0) is
recommended. When 2.7 to 3.6 V is applied to
VccQ1, setting the drivability low (DRV = 1) is
recommended.
R/W Reserved
R/W See section 23, USB Pin Multiplex Controller.
R/W
Rev. 3.00 Jan. 18, 2008 Page 1178 of 1458
REJ09B0033-0300