English
Language : 

SH7720 Datasheet, PDF (1087/1524 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series
Section 30 SIM Card Module (SIM)
(5) Pin Connections
An example of pin connections for the smart card interface is shown in figure 30.11.
In communication with the smart card, transmission and reception are performed using a single
data transmit line. The data transmit line should be pulled up by a resistance on the power supply
Vcc side.
When using the clock generated by the smart card interface with the IC card, the SIM_CLK pin
output is input to the CLK pin of the IC card. If an internal clock of the IC card is used, this
connection is not needed.
SIM_D
Data line
20 kΩ
I/O
Smart card
interface
SIM_CLK
Clock line
CLK
SIM_RST
Reset line
RST
This LSI
Smart card
Note: For details, refer to ISO/IEC7816-3.
Figure 30.11 Example of Pin Connections in Smart Card Interface
Note: The transmission/reception in loop can perform self-check when the RE and TE bits are
set to 1 without connecting to the IC card.
Rev. 3.00 Jan. 18, 2008 Page 1025 of 1458
REJ09B0033-0300