SH7720 Datasheet, PDF (1061/1524 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 30 SIM Card Module (SIM)
Initial
Bit Bit Name Value R/W Description
2
TEND
1
R
Transmit End
Indicates that transmission is ended.
The TEND flag is read-only, and cannot be written.
0: Indicates that transmission is in progress
[Clearing condition]
When transmit data is transferred from SCTDR to SCTSR,
and serial transmission is initiated.
1: Indicates that transmission is ended
[Setting conditions]
• On reset
• When the ERS flag is 0 (normal transmission) after one
byte of serial character and a parity bit are transmitted
Note: The TEND flag is set 1 etu before the end of the
character protection time.
Rev. 3.00 Jan. 18, 2008 Page 999 of 1458
REJ09B0033-0300