UPD78F1502AGK-GAK-AX Datasheet, PDF (962/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
APPENDIX A DEVELOPMENT TOOLS
Remark 2. The packed contents differ depending on the part number, as follows.
Packed Contents In-Circuit Emulator Emulation Probe Exchange Adapter YQ Connector Target Connector
Part Number
QB-78K0RLX3-ZZZ
QB-78K0RLX3 None
QB-78K0RLX3-T80GC
QB-144-EP-02S QB-80GK-EA-09T QB-80GC-YQ-01T QB-80GC-NQ-01T
QB-78K0RLX3-T80GK
QB-80GK-EA-08T QB-80GK-YQ-01T QB-80GK-NQ-01T
QB-78K0RLX3-T100GC
QB-100GC-EA-08T QB-100GC-YQ-01T QB-100GC-NQ-01T
QB-78K0RLX3-T128GF
QB-128GF-EA-01T QB-128GF-YQ-01T QB-128GF-NQ-01T
A.4.2 When using on-chip debug emulator with programming function QB-MINI2
QB-MINI2
On-chip debug emulator with
programming function
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0R/Lx3 microcontrollers. It is available also as flash
memory programmer dedicated to microcontrollers with on-chip flash memory. When
using this as on-chip debug emulator, it should be used in combination with a connection
cable (16-pin cable), and USB interface cable that is used to connect the host machine.
Remark Download the software for operating the QB-MINI2 from the download site for MINICUBE2
(http://www2.renesas.com/micro/en/development/asia/minicube2/minicube2.html).
A.5 Debugging Tools (Software)
ID78K0R-QB
Integrated debugger^{Note 1}
SM+ for 78K0R
SM+ for 78K0R/Lx3^{Note 2}
System simulator
This debugger supports the in-circuit emulators for the 78K0R microcontrollers. The
ID78K0R-QB is Windows-based software.
It has improved C-compatible debugging functions and can display the results of tracing
with the source program using an integrating window function that associates the source
program, disassemble display, and memory display with the trace result. It should be
used in combination with the device file (DF781508).
System simulator is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating
the operation of the target system on a host machine.
Use of system simulator allows the execution of application logical testing and
performance testing on an independent basis from hardware development, thereby
providing higher development efficiency and software quality.
System simulator should be used in combination with the device file (DF781508).
The following two types of system simulators supporting the 78K0R/Lx3 microcontrollers
are available.
• SM+ for 78K0R (instruction simulation version)
This can only simulate a CPU. It is included in the software package.
• SM+ for 78K0R/Lx3 (instruction + peripheral simulation version)^{Note 1}
This can simulate a CPU and peripheral hardware (ports, timers, serial interfaces,
etc.).
Notes 1.
2.
Download the ID78K0R-QB from the download site for development tools
(http://www2.renesas.com/micro/en/ods/).
Under development
R01UH0004EJ0501 Rev.5.01
946
Jun 20, 2011