UPD78F1502AGK-GAK-AX Datasheet, PDF (1021/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
APPENDIX D REVISION HISTORY
Edition
3rd Edition
Description
Addition of description to 6.7.1 Operation as interval timer/square wave output
Modification of Figure 6-37 Block Diagram of Operation as Interval
Timer/Square Wave Output
Addition of (2) When the timer input (TIpq pin input, fSUB/4, fSUB/2 or INTRTCI) is
selected as count clock to Figure 6-39 Example of Set Contents of Registers
During Operation as Interval Timer/Square Wave Output
Modification of Figure 6-40 Operation Procedure of Interval Timer/Square Wave
Output Function (1/2)
Modification of Caution in Figure 7-3 Format of Real-Time Counter Control
Register 0 (RTCC0)
Addition of description to 7.3 (8) Hour count register (HOUR)
Addition of description to Figure 7-14 Format of Watch Error Correction Register
(SUBCUD)
Modification of Figure 7-26 512 Hz or 16.384 kHz Output Setting Procedure
Addition of Caution 3 to Figure 9-2 Format of Clock Output Select Register n
(CKSn)
Modification of Remark in 9.4.1 Operation as output pin
Modification of Figure 9-4 Remote Control Output Application Example
Addition of Notes 2, 3 to and modification of Cautions 1, 2 in Figure 10-4 Format
of A/D Converter Mode Register (ADM)
Modification of Table 10-2 A/D Conversion Time Selection
Modification of description in 10.3 (4) Analog reference voltage control register
(ADVRC)
Modification of Figure 10-8 Format of Analog Reference Voltage Control
Register (ADVRC)
Addition of <3> to and modification of <8> and Caution 4 in 10.4.1 Basic
operations of A/D converter
Modification of Figure 10-16 Software trigger mode (Continuous conversion
mode)
Modification of Figure 10-17 Software trigger mode (Single conversion mode)
Modification of <2> in 10.4.3 (3) Timer trigger mode (Continuous conversion
mode)
Modification of Figure 10-18 Timer trigger mode (Continuous conversion mode)
Modification of <2> in and addition of <5> to 10.4.3 (4) Timer trigger mode (Single
conversion mode)
Modification of Figure 10-19 Timer trigger mode (Single conversion mode)
Addition of <3> to and modification of <8>, <11> and Caution 7 in setting methods of
10.4.3 A/D converter operation modes
Modification of 10.6 (1) Operating current in STOP mode and (12) Rewriting
DACSWn during A/D conversion
Modification of Figure 11-1 Block Diagram of D/A Converter
Addition of Note 1 to and modification of Note 2 and Remark in Figure 11-3
Format of D/A Converter Mode Register (DAM)
Modification of Caution in Figure 11-4 Format of D/A Conversion Value Setting
Registers W0 and W1 (DACSW0, DACSW1)
Modification of <3>, <6> in and addition of Cautions 1, 2 to 11.4.1 Operation in
normal mode
Modification of <3>, <6>, <9> in and addition of Cautions 1 to 3 to 11.4.2
Operation in real-time output mode
Modification of (3) in 11.5 Cautions for D/A Converter
(7/14)
Chapter
CHAPTER 6 TIMER
ARRAY UNIT
CHAPTER 7 REAL-
TIME COUNTER
CHAPTER 9 CLOCK
OUTPUT/BUZZER
OUTPUT
CONTROLLER
CHAPTER 10 A/D
CONVERTER
CHAPTER 11 D/A
CONVERTER
R01UH0004EJ0501 Rev.5.01
Jun 20, 2011
1005