|
UPD78F1502AGK-GAK-AX Datasheet, PDF (749/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers | |||
|
◁ |
78K0R/Lx3
CHAPTER 18 DMA CONTROLLER
18.5.5 UART consecutive reception + ACK transmission
A flowchart illustrating an example of setting for UART consecutive reception + ACK transmission is shown below.
⢠Consecutively receives data from UART0 and outputs ACK to P10 on completion of reception.
⢠DMA channel 0 is used for DMA transfer.
⢠DMA start source: Software trigger (DMA transfer on occurrence of an interrupt is disabled.)
⢠Transfers FFF12H of UART receive data register 0 (RXD0) to 64 bytes of FFE00H to FFE3FH of RAM.
R01UH0004EJ0501 Rev.5.01
733
Jun 20, 2011
|
▷ |