English
Language : 

UPD78F1502AGK-GAK-AX Datasheet, PDF (295/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers
78K0R/Lx3
CHAPTER 6 TIMER ARRAY UNIT
Cautions 1. For 78K0R/LF3, be sure to clear bits 15 to 8, 6 and 5 of TOE0 to “0”.
2. For 78K0R/LG3, be sure to clear bits 15 to 8 of TOE0 to “0”.
3. For 78K0R/LH3, be sure to clear bit 15 to 8 of TOE0, bits 15 to 4 of TOE1 to “0”.
Remark
pq: Unit number + Channel number (only for channels provided with timer I/O pins)
78K0R/LF3: p = 0, pq = 00 to 04, 07
78K0R/LG3: p = 0, pq = 00 to 07
78K0R/LH3: p = 0, 1, pq = 00 to 07, 10 to 13
(10) Timer output register p (TOp)
TOp is a buffer register of timer output of each channel.
The value of each bit in this register is output from the timer output pin (TOpq) of each channel.
This register can be rewritten by software only when timer output is disabled (TOEpq = 0). When timer output is
enabled (TOEpq = 1), rewriting this register by software is ignored, and the value is changed only by the timer
operation.
To use the P30/TO00, P32/TO01, P12/TO02, P31/TO03, P13/TO04, P16/TO05, P34/TO06, P33/TO07, P84/TO10,
P85/TO11, P86/TO12, or P87/TO13 pin as a port function pin, set the corresponding TOpq bit to “0”.
TOp can be set by a 16-bit memory manipulation instruction.
The lower 8 bits of TOp can be set with an 8-bit memory manipulation instruction with TOpL.
Reset signal generation clears this register to 0000H.
R01UH0004EJ0501 Rev.5.01
279
Jun 20, 2011