UPD78F1502AGK-GAK-AX Datasheet, PDF (58/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
CHAPTER 2 PIN FUNCTIONS
<R>
<R>
(2) Non-port functions (5/5) : 78K0R/LH3
Function Name I/O
Function
After Reset Alternate Function
TO10
Output 16-bit timer 10 output
Input port P84/TI10
TO11
16-bit timer 11 output
P85/TI11
TO12
16-bit timer 12 output
P86/TI12
TO13
16-bit timer 13 output
P87/TI13
TxD0
Output Serial data output from UART0
Input port P82/SO00
TxD1
Serial data output from UART1
P13/SO10/TO04
TxD2
Serial data output from UART2
P12/SO20/TO02
TxD3
Serial data output from UART3
P51/SEG52
X1
−
Resonator connection for main system clock
Input port P121
X2
−
Input port P122/EXCLK
EXCLK
Input External clock input for main system clock
Input port P122/X2
XT1
−
Resonator connection for subsystem clock
Input port P123
XT2
−
Input port P124
VDD
−
Positive power supply (Pins other than port and RESET, FLMD0
−
−
pins)
EVDD
−
Positive power supply for RESET, FLMD0 pins, and port pins
−
−
other than P20 to P27, P110, P111, P150 to P152, P157
AVDD, ^{Note 1}
−
Positive power supply for P20 to P27, P150 to P152, P157
−
−
AV Note 2
DD
AV Note 1
DD1
EV Note 2
DD1
−
Positive power supply for P110, P111
−
−
VSS
−
Ground potential (Pins other than port and RESET, FLMD0
−
−
pins)
EVSS
−
Ground potential for RESET, FLMD0 pins, and port pins other
−
−
than P20 to P27, P110, P111, P150 to P152, P157
AVSS
−
Ground potential for P20 to P27, P110, P111, P150 to P152,
−
−
P157
FLMD0
−
Flash memory programming mode setting
−
−
TOOL0
I/O
Data I/O for flash memory programmer/debugger
Input port P40
TOOL1
Output Clock output for debugger
Input port P41
Notes 1. AVDD0 and AVDD1 apply to μ PD78F150xA only.
2. AVDD and EVDD1 apply to μ PD78F151xA only.
R01UH0004EJ0501 Rev.5.01
42
Jun 20, 2011