|
UPD78F1502AGK-GAK-AX Datasheet, PDF (267/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers | |||
|
◁ |
78K0R/Lx3
CHAPTER 6 TIMER ARRAY UNIT
CHAPTER 6 TIMER ARRAY UNIT
Item
Timer array
unit
78K0R/LF3
80 pins
0 8 ch (PWM output: 5)
1 4 ch (PWM output: 0)
78K0R/LG3
100 pins
8 ch (PWM output: 7)
4 ch (PWM output: 0)
78K0R/LH3
128 pins
8 ch (PWM output: 7)
4 ch (PWM output: 3)
The 78K0R/Lx3 is provided with two timer array units. Time array unit 0 is provided with eight 16-bit timers and timer
array unit 1 is provided with four 16-bit timers. Each 16-bit timer is called a channel and can be used as an independent
timer. In addition, two or more âchannelsâ can be used to create a high-accuracy timer.
Independent Operation Function
⢠Interval timer
⢠Square wave output
⢠External event counter
⢠Divider function
⢠Input pulse interval measurement
⢠Measurement of high-/low-level width of input signal
Combination Operation Function
⢠PWM output
⢠One-shot pulse output
⢠Multiple PWM output
Channel 7 of timer array unit 0 can be used to realize LIN-bus reception processing in combination with UART3 of serial
array unit 1.
Cautions 1. Channel 5 of timer array unit 0 of the 78K0R/LF3 can be used only as an interval timer.
2. Channel 6 of timer array unit 0 of the 78K0R/LF3 can be used only as an interval timer, for PWM
output (master channel), and for one-shot pulse output (master channel when software trigger
start is selected).
3. Channels 0 to 3 of timer array unit 1 of the 78K0R/LF3 and 78K0R/LG3 can be used only as
interval timers.
4. Channels 1, 5 to 7 of timer array unit 0 and channels 0 to 3 of timer array unit 1 cannot be used as
frequency dividers.
R01UH0004EJ0501 Rev.5.01
251
Jun 20, 2011
|
▷ |