UPD78F1502AGK-GAK-AX Datasheet, PDF (961/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
APPENDIX A DEVELOPMENT TOOLS
A.4 Debugging Tools (Hardware)
A.4.1 When using in-circuit emulator QB-78K0RLX3
QB-78K0RLX3
In-circuit emulator
QB-144-CA-01
Check pin adapter
QB-144-EP-02S
Emulation probe
QB-xxxx-EA-xxx^Note
Exchange adapter
QB-xxxx-YS-xxx^Note
Space adapter
QB-xxxx-YQ-xxx^Note
YQ connector
QB-xxxx-HQ-xxx^Note
Mount adapter
QB-xxxx-NQ-xxx^Note
Target connector
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0R/Lx3 microcontrollers. It supports to the integrated debugger (ID78K0R-
QB). This emulator should be used in combination with a power supply unit and emulation probe,
and the USB is used to connect this emulator to the host machine.
This check pin adapter is used in waveform monitoring using the oscilloscope, etc.
This emulation probe is flexible type and used to connect the in-circuit emulator and target
system.
This exchange adapter is used to perform pin conversion from the in-circuit emulator to target
connector.
This space adapter is used to adjust the height between the target system and in-circuit emulator.
This YQ connector is used to connect the target connector and exchange adapter.
This mount adapter is used to mount the target device with socket.
This target connector is used to mount on the target system.
Note The part numbers of the exchange adapter, space adapter, YQ connector, mount adapter, and target connector
and the packages of the target device are described below.
Package
78K0R/LF3
78K0R/LG3
78K0R/LH3
80-pin plastic
LQFP (GC-GAD type)
80-pin plastic
LQFP (GK-GAK type)
100-pin plastic
LQFP (GC-UEU type)
128-pin plastic
LQFP (GF-GAT type)
Exchange
Adapter
QB-80GC-
EA-09T
QB-80GK-
EA-08T
QB-100GC-
EA-08T
QB-128GF-
EA-01T
Space
Adapter
QB-80GC-
YS-01T
QB-80GK-
YS-01T
QB-100GC-
YS-01T
QB-128GF-
YS-01T
YQ
Connector
QB-80GC-
YQ-01T
QB-80GK-
YQ-01T
QB-100GC-
YQ-01T
QB-128GF-
YQ-01T
Mount
Adapter
QB-80GC-
HQ-01T
QB-80GK-
HQ-01T
QB-100GC-
HQ-01T
QB-128GF-
HQ-01T
Target
Connector
QB-80GC-
NQ-01T
QB-80GK-
NQ-01T
QB-100GC-
NQ-01T
QB-128GF-
NQ-01T
Remark
1. The QB-78K0RLX3 is supplied with an integrated debugger ID78K0R-QB, USB interface cable, and on-
chip debug emulator QB-MINI2.
When using the QB-MINI2 download the software for operating the QB-MINI2 from the download site for
development tools (http://www2.renesas.com/micro/en/ods/).
R01UH0004EJ0501 Rev.5.01
945
Jun 20, 2011