UPD78F1502AGK-GAK-AX Datasheet, PDF (869/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
CHAPTER 28 ON-CHIP DEBUG FUNCTION
Figure 28-2. Memory Spaces Where Debug Monitor Programs Are Allocated
Internal ROM
Internal RAM
Note 1
(1 KB)
Stack area for debugging _{Internal RAM}
(6 bytes) ^{Note 3}
area
02000H
010D8H
010CEH
Boot cruster 1
010C4H
010C3H
01002H
01000H
000D8H
000CEH
Boot cruster 0
000C4H
000C3H
00002H
00000H
Debug monitor area
(10 bytes)
Security ID area
(10 bytes)
Use prohibited
Internal ROM
area
On-chip debug option byte area
(1 byte)
Debug monitor area
(2 bytes)
Note 2
: Area used for on-chip debugging
Debug monitor area
(10 bytes)
Security ID area
(10 bytes)
Debug monitor area
(2 bytes)
Note 2
On-chip debug option byte area
(1 byte)
<R>
<R>
Notes 1. Address differs depending on products as follows.
Products
Internal ROM
Address
μ PD78F1500A, 78F1503A, 78F1506A, 78F1510A, 78F1513A, 78F1516A
64 KB
0FC00H to 0FFFFH
μ PD78F1501A, 78F1504A, 78F1507A
96 KB
17C00H to 17FFFH
μ PD78F1502A, 78F1505A, 78F1508A, 78F1512A, 78F1515A, 78F1518A
128 KB
1FC00H to 1FFFFH
2. In debugging, reset vector is rewritten to address allocated to a monitor program.
3. Since this area is allocated immediately before the stack area, the address of this area varies depending on
the stack increase and decrease. That is, 6 extra bytes are consumed for the stack area used.
For details of the way to secure of the memory space, refer to the QB-MINI2 On-Chip Debug Emulator with
Programming Function User’s Manual (U18371E).
R01UH0004EJ0501 Rev.5.01
853
Jun 20, 2011