UPD78F1502AGK-GAK-AX Datasheet, PDF (77/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
CHAPTER 2 PIN FUNCTIONS
Table 2-2. Connection of Unused Pins (78K0R/LF3) (2/3)
Pin Name
P90/SEG22 to P92/SEG20
P100/SEG11
I/O Circuit Type
17-P
<R>
P110/ANO0 ^{Note 3},
P111/ANO1 ^{Note 3}
P120/INTP0/EXLVI
12-A ^{Note 4}
8-R
P121/X1^{Note 1}
P122/X2/EXCLK^{Note 1}
P123/XT1^{Note 1}
P124/XT2^{Note 1}
37-C
37-A
P130
3-C
P140/SEG19 to P147/SEG12 17-P
<R>
P157/ANI15/AVREFM ^{Note 2, 3}
11-T ^{Note 5}
SEG0/COM4 to SEG3/COM7 18-F
SEG4 to SEG10
17-T
COM0 to COM3
18-E
VLC0 to VLC2
−
I/O
I/O
I/O
Input
Recommended Connection of Unused Pins
<When setting to port I/O>
Input: Independently connect to EVDD or EVSS via a resistor.
Output: Leave open.
<When setting to segment output>
Leave open.
Input: Independently connect to AVDD1 or AVSS via a resistor.
Output: Leave open.
Input: Independently connect to EVDD or EVSS via a resistor.
Output: Leave open.
Independently connect to EVDD or EVSS via a resistor.
Output
I/O
I/O
Output
Leave open.
<When setting to port I/O>
Input: Independently connect to EVDD or EVSS via a resistor.
Output: Leave open.
<When setting to segment output>
Leave open.
Input: Independently connect to AVDD0 or AVSS via a resistor.
Output: Leave open.
Leave open.
−
Notes 1. Use recommended connection above in input port mode (see Figure 5-2 Format of Clock Operation Mode
Control Register (CMC)) when these pins are not used.
2. P157/ANI15/AVREFM is set in the digital input port mode after release of reset.
<R>
3. ANOx and AVREFM apply to μ PD78F150xA only.
4. μ PD78F151xA corresponds to type 5.
5. μ PD78F151xA corresponds to type 11-G.
R01UH0004EJ0501 Rev.5.01
61
Jun 20, 2011