UPD78F1502AGK-GAK-AX Datasheet, PDF (903/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
CHAPTER 31 ELECTRICAL SPECIFICATIONS
<R>
<R>
<R>
DC Characteristics (3/11)
(TA = −40 to +85°C, 1.8 V ≤ VDD = EVDD ≤ 5.5 V, 1.8 V ≤ AVDD0 ≤ VDD,
1.8 V ≤ AVDD ≤ VDD, 1.8 V ≤ EVDD1 = VDD, VSS = EVSS = AVSS = 0 V)
1.8 V ≤ AVDD1 ≤ VDD,
Items
Symbol
Conditions
MIN. TYP. MAX. Unit
Input voltage, VIH1
high
VIH2
VIH3
P00 to P02, P12, P13, P17, P41, P51, P54 to P57, P82,
0.7VDD
P83, P90 to P97, P100 to P102, P123, P124, P140 to P147
P10, P11, P14 to P16, P30 to P34,
P40, P50, P52, P53, P70 to P77,
P80, P81, P84 to P87, P120 to P122,
RESET
Normal input buffer
0.8VDD
P10, P11, P14, P15, P75, P76
TTL input buffer
2.2
4.0 V ≤ VDD ≤ 5.5 V
TTL input buffer
2.0
2.7 V ≤ VDD < 4.0 V
VDD
V
VDD
V
VDD
V
VDD
V
TTL input buffer
1.6
1.8 V ≤ VDD < 2.7 V
VIH4
P20 to P27, P150 to P152, P157
μ PD78F150xA
0.7AVDD0
μ PD78F151xA
0.7AVDD
VIH5
P110, P111
μ PD78F150xA
0.7AVDD1
μ PD78F151xA
0.7EVDD1
VDD
V
AVDD0
V
AVDD
V
AVDD1
V
EVDD1
V
VIH6
P60, P61
VIH7
FLMD0
0.7VDD
0.9VDD ^Note
6.0
V
VDD
V
Note Must be 0.9VDD or higher when used in the flash memory programming mode.
Caution The maximum value of VIH of pins P10 to P15, P75, P77, P80 and P82 is VDD, even in the N-ch open-
drain mode.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
R01UH0004EJ0501 Rev.5.01
887
Jun 20, 2011