UPD78F1502AGK-GAK-AX Datasheet, PDF (895/1031 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcontrollers

78K0R/Lx3
CHAPTER 31 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25°C) (3/3)
Parameter
Symbols
Conditions
Ratings
Unit
Output current, low
IOL1
IOL2
IOL3
Operating ambient
TA
temperature
Storage temperature Tstg
Per pin
P00 to P02, P10-P17, P30 to P34,
30
mA
P40, P41, P70 to P77, P80 to
P87, P120, P130
P60, P61
30
mA
P50 to P57, P90 to P97, P100 to
10
mA
P102, P140 to P147
Total of all pins P00 to P02, P10-P17, P30 to P34,
80
mA
165 mA
P40, P41, P70 to P77, P80 to
P87, P120, P130
P60, P61
60
mA
P50 to P57, P90 to P97, P100 to
25
mA
P102, P140 to P147
Per pin
P20 to P27, P150 to P152,
Total of all pins ^{P157, P110, P111}
1
mA
5
mA
Per pin
AMP0O, AMP1O, AMP2O
1
mA
Total of all pins
3
mA
In normal operation mode
−40 to +85
°C
In flash memory programming mode
−65 to +150
°C
Cautions 1. Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
2. The value of the current that can be run per pin must satisfy the value of the current per pin and the
total value of the currents of all pins.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
R01UH0004EJ0501 Rev.5.01
879
Jun 20, 2011