HD6432351 Datasheet, PDF (402/989 Pages) Renesas Technology Corp – The H8S/2000 CPU has an internal 32-bit architecture, is provided with sixteen 16-bit general registers and a concise

Port E Data Register (PEDR)
Bit
:
Initial value :
R/W
:
7
PE7DR
0
R/W
6
PE6DR
0
R/W
5
PE5DR
0
R/W
4
PE4DR
0
R/W
3
PE3DR
0
R/W
2
PE2DR
0
R/W
1
PE1DR
0
R/W
0
PE0DR
0
R/W
PEDR is an 8-bit readable/writable register that stores output data for the port E pins (PE₇ to PE₀).
PEDR is initialized to H'00 by a power-on reset, and in hardware standby mode. It retains its prior
state after a manual reset, and in software standby mode.
Port E Register (PORTE)
Bit
:
7
6
5
4
3
2
1
0
PE7
PE6
PE5
PE4
PE3
PE2
PE1
PE0
Initial value :
—*
—*
—*
—*
—*
—*
—*
—*
R/W
:
R
R
R
R
R
R
R
R
Note: * Determined by state of pins PE7 to PE0.
PORTE is an 8-bit read-only register that shows the pin states. It cannot be written to. Writing of
output data for the port E pins (PE₇ to PE₀) must always be performed on PEDR.
If a port E read is performed while PEDDR bits are set to 1, the PEDR values are read. If a port E
read is performed while PEDDR bits are cleared to 0, the pin states are read.
After a power-on reset and in hardware standby mode, PORTE contents are determined by the pin
states, as PEDDR and PEDR are initialized. PORTE retains its prior state after a manual reset, and
in software standby mode.
Port E MOS Pull-Up Control Register (PEPCR) [H8S/2351 Only]
Bit
:
Initial value :
R/W
:
7
6
5
4
3
2
1
0
PE7PCR PE6PCR PE5PCR PE4PCR PE3PCR PE2PCR PE1PCR PE0PCR
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
PEPCR is an 8-bit readable/writable register that controls the MOS input pull-up function
incorporated into port E on an individual bit basis.
382