SH7727 Datasheet, PDF (91/1109 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7700 Series

Section 1 Overview and Pin Functions
Pin No.
Pin No.
(PRQP0240KC-B) (PLBG0240JA-A) Name
I/O
Function
226
F3
USB1_P(analog) IO
USB1 data I/O (plus)
227
F2
USB1_M(analog) IO
USB1 data I/O (minus)
228
F1
AVss_USB
—
USB analog power supply (0 V)
229
E4
USB2_P(analog) IO
USB2 data I/O (plus)
230
E3
USB2_M(analog) IO
USB2 data I/O (minus)
231
C3
AVcc_USB
—
USB analog power supply (3.3 V)
232
E1
AVss
—
Analog power supply (0 V)
233
D3
AN[2]/PTL[2]
I/I
A/D converter input / input port L
234
D1
AN[3]/PTL[3]
I/I
A/D converter input / input port L
235
E2
AN[4]/PTL[4]
I/I
A/D converter input / input port L
236
C1
AN[5]/PTL[5]
I/I
A/D converter input / input port L
237
C2
AVcc
—
Analog power supply (3.3 V)
238
B1
AN[6]/PTL[6]/DA[1] I/I/O
A/D converter input / input port L /
D/A converter output
239
D2
AN[7]/PTL[7]/DA[0] I/I/O
A/D converter input / input port L /
D/A converter output
240
B2
AVss
—
Analog power supply (0 V)
Notes: All Vcc/Vss should be connected to the all system power supply (so that power is supplied
at all times).
1. Always supply power to the Vcc-RTC, even if RTC is not being used.
2. Always supply power to the Vcc-PLL, even if the internal PLL is not being used.
3. Drive high when using the user system alone, and not using an emulator or the H-UDI.
When this pin is low or open, RESETP may be masked.
Rev. 5.00 Dec 12, 2005 page 19 of 1034
REJ09B0254-0500