SH7727 Datasheet, PDF (1006/1109 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7700 Series

Section 32 Electrical Characteristics
Item
Measurement
Symbol Min
Typ
Max
Unit Conditions
Pull-up
Port pin
resistance
Ppull
30
60
120
kΩ
Pin
capacity
Pins other than C
analog pins
—
—
10
pF
Analog pins*
CAN
—
—
20
pF
Note: * There are four analog pins, USB1_P, USB2_P, USB1_M, and USB2_M.
Table 32.3 Permitted Output Current Values
Conditions: VccQ = 2.6 to 3.6 V, Vcc = 1.60 to 2.05 V, AVcc = 3.0 to 3.6 V, Ta = –20 to 75°C
Item
Symbol
Min Typ Max Unit
Output low-level permissible current (per pin)
IOL
—
— 2.0 mA
Output low-level permissible current (total)
∑ IOL
—
— 120 mA
Output high-level permissible current (per pin)
–IOH
—
— 2.0 mA
Output high-level permissible current (total)
∑ (–IOH)
—
— 40 mA
Caution: To ensure LSI reliability, do not exceed the value for output current given in table 32.3.
32.3 AC Characteristics
In general, inputting for this LSI should be clock synchronous. Keep the setup and hold times for
each input signal unless otherwise specified. Regarding the power supply and frequency
specifications of the individual products, refer to figure 32.2, tables 32.2 and 32.4.
Rev. 5.00 Dec 12, 2005 page 934 of 1034
REJ09B0254-0500