SH7706 Datasheet, PDF (720/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series

Appendix
Notes: 1. Depending on the clock mode (MD2 to MD0 setting)
2. 0 when DA output is enabled: otheruise Z.
3. K or P when the port function is used.
4. K or P when the port function is used. Z or O when the port function is not used
depending on register setting.
5. K or P when the port function is used. I or O when the port function is not used
depending on register setting.
6. Depending on register setting
7. I or O when the port function is used.
8. Input Schmitt buffers of IRQ[5:0] and ADTRG are on. Input Schmitt buffers of the other
inputs (e.g. PTH, CTS2) that are shared with these pins are off.
9. O when DA output is enabled; otherwise depends on a register setting.
10. In the standby mode, Z or L depending on register setting.
11. In the standby mode, Z or H depending on register setting.
12. In the standby mode, CKIO may be either high or low level.
Rev. 5.00 May 29, 2006 page 672 of 698
REJ09B0146-0500