SH7706 Datasheet, PDF (18/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series

Item
Section 17 Pin
Function Controller
(PFC)
Table 17.1 List of
Multiplexed Pins
Page
487
17.1.6 Port F Control 498
Register (PFCR)
17.1.10 SC Port
503
Control Register
(SCPCR)
18.6 Port F
517
Figure 18.6 Port F
Revision (See Manual for Details)
Table amended
Port
F
F
F
Port Function
(Related Module)
PTF2 I/O (port)
PTF1 input (port)
PTF0 I/O (port)
Other Function
(Related Module)
AUDATA[2] I/O (AUD)
AUDATA[1] I/O (AUD)
AUDATA[0] I/O (AUD)
Bit table amended
Bit Bit Name Initial Value R/W
3
PF1MD1 1/0
R/W
2
PF1MD0 0
R/W
Description
PF1 Mode 1
00: Other function (See table 17.1)
01: Reserved (Setting prohibited)
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
Description amended
When the TE bit in SCSCR is set to 1, the SCPCR setting is
ignored and the TxD function is selected.
When the RE bit in SCSCR is set to 1, the SCPCR setting is
ignored and the RxD function is selected.
When the TE bit in SCSCR2 is set to 1, the SCPCR setting is
ignored and the TxD2 function is selected.
When the RE bit in SCSCR2 is set to 1, the SCPCR setting is
ignored and the RxD2 function is selected.
Figure amended
Port F
PTF6 (I/O) / ASEBRKAK (output)
PTF5 (I/O) / TDO (output)
PTF4 (I/O) / AUDSYNC (output)
PTF3 (I/O) / AUDATA3 (I/O)
PTF2 (I/O) / AUDATA2 (I/O)
PTF1 (input) / AUDATA1 (I/O)
PTF0 (I/O) / AUDATA0 (I/O)
18.10.2 SC Port Data 526
Register (SCPDR)
Bit table amended
Bit
Bit Name Initial Value R/W
5
SCP5DT 0
R
4
SCP4DT 0
R/W
3
SCP3DT 0
R/W
Description
Table 18.10 shows the function of SCPDR
Rev. 5.00 May 29, 2006 page xviii of xlviii