English
Language : 

SH7706 Datasheet, PDF (710/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series
Section 24 Electrical Characteristics
24.3.11 AC Characteristics Measurement Conditions
• I/O signal reference level: VccQ/2 (VccQ = 3.3 ± 0.3 V, Vcc = 1.9 ± 0.15 V)
• Input pulse level: VssQ to 3.0 V (where RESETP, RESETM, ASEMD0, ADTRG, TRST, CA,
NMI, IRQ5 to IRQ0, CKIO, and MD5 to MD0 are within VssQ to VccQ)
• Input rise and fall times: 1 ns
IOL
LSI output pin
CL
DUT output
VREF
IOH
Notes: 1. CL is the total value that includes the capacitance of measurement
instruments, etc., and is set as follows for each pin.
30 pF: CKIO, RASx, CASxx, CS0, CS2 to CS6, CE2A, CE2B, BACK
50 pF: All other pins
2. IOL and IOH are the values shown in table 23.3.
Figure 24.62 Output Load Circuit
Rev. 5.00 May 29, 2006 page 662 of 698
REJ09B0146-0500