SH7706 Datasheet, PDF (502/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series

Section 16 Serial Communication Interface with FIFO (SCIF)
Initial
Bit Bit Name Value R/W Description
6
TEND
1
R/(W)* Transmit End
Indicates that when the last bit of a serial character was
transmitted, the SCFTDR2 did not contain valid data, so
transmission has ended.
0: Transmission is in progress.
[Clearing condition]
Data is written to SCFTDR2.
1: End of transmission
[Setting conditions]
1. When the chip is reset or enters standby mode, TE in
the SCSCR2 is cleared to 0.
2. SCFTDR2 contains no transmit data when the last bit
of a one-byte serial character is transmitted.
Rev. 5.00 May 29, 2006 page 454 of 698
REJ09B0146-0500