SH7706 Datasheet, PDF (5/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series

Preface
The SH7706 RISC (Reduced Instruction Set Computer) microcomputer includes a Renesas
Technology original RISC CPU as its core, and the peripheral functions required to configure a
system.
Target Users: This manual was written for users who will be using this LSI in the design of
application systems. Users of this manual are expected to understand the
fundamentals of electrical circuits, logical circuits, and microcomputers.
Objective:
This manual was written to explain the hardware functions and electrical
characteristics of this LSI to the above users.
Refer to the SH-3/SH-3E/SH3-DSP Programming Manual for a detailed description
of the instruction set.
Notes on reading this manual:
• Product names
The following products are covered in this manual.
Product Classifications and Abbreviations
Basic Classification
SH7706 (176-pin plastic LQFP)
SH7706 (208-pin plastic TFBGA)
Product Code
HD6417706F133
HD6417706BP133V
• In order to understand the overall functions of the chip
Read the manual according to the contents. This manual can be roughly categorized into parts
on the CPU, system control functions, peripheral functions and electrical characteristics.
• In order to understand the details of the CPU’s functions
Read the SH-3/SH-3E/SH3-DSP Programming Manual.
Rules:
Register name:
The following notation is used for cases when the same or a
similar function, e.g. serial communication, is implemented
on more than one channel:
XXX_N (XXX is the register name and N is the channel
number)
Bit order:
The MSB (most significant bit) is on the left and the LSB
(least significant bit) is on the right.
Number notation: Binary is B'xxxx, hexadecimal is H'xxxx, decimal is xxxx.
Signal notation: An overbar is added to a low-active signal: xxxx
Rev. 5.00 May 29, 2006 page v of xlviii